LNB tyypin kovametalliterä
2-leikkuinen erikoispinnoitettu terä 30° kulmalla.
Raekoko 0,4 µm.
Soveltuu teräksille kovuuteen 60 HRC asti.
Ole hyvä ja kirjaudu sisään ostaaksesi. Kirjaudu sisään
Kuvaus
| Features: |
|
1. The 2 flutes long neck of ball nose endmill design, which is suitable for 3D cutting of steel materials hardness up to HRc48.
|
|
2. The minimum diameter is 1mm.
|
| Working Materials Hardness Level: Good at steel material (HRc 18~45). E.g. S45C, P20 ,NAK80,SUS304 etc. |
Applicable Milling Methods:  Finishing, Semi-finishing. |
Applicable Coolant Ways: Emulsion Machining , Oil Machining, MQL (Mist) Machining,  Dry Machining. |
| Type No. | Diameter | Neck Dia | Flute Length | Effective Length | OAL | Shank Dia. |
|---|---|---|---|---|---|---|
| D1 | D3 | L1 | L2 | L3 | D2 | |
| LNB1006 | R0.5 | 0.95 | 1.5 | 6 | 50 | 4 |
| LNB1008 | R0.5 | 0.95 | 1.5 | 8 | 50 | 4 |
| LNB1010 | R0.5 | 0.95 | 1.5 | 10 | 50 | 4 |
| LNB1012 | R0.5 | 0.95 | 1.5 | 12 | 50 | 4 |
| LNB1508 | R0.75 | 1.45 | 2 | 8 | 50 | 4 |
| LNB1510 | R0.75 | 1.45 | 2 | 10 | 50 | 4 |
| LNB1512 | R0.75 | 1.45 | 2 | 12 | 50 | 4 |
| LNB1516 | R0.75 | 1.45 | 2 | 16 | 50 | 4 |
| LNB1520 | R0.75 | 1.45 | 2 | 20 | 50 | 4 |
| LNB2008 | R1.0 | 1.92 | 3 | 8 | 50 | 4 |
| LNB2010 | R1.0 | 1.92 | 3 | 10 | 50 | 4 |
| LNB2012 | R1.0 | 1.92 | 3 | 12 | 50 | 4 |
| LNB2016 | R1.0 | 1.92 | 3 | 16 | 50 | 4 |
| LNB2020 | R1.0 | 1.92 | 3 | 20 | 50 | 4 |
| LNB3008 | R1.5 | 2.90 | 4 | 8 | 50 | 6 |
| LNB3010 | R1.5 | 2.90 | 4 | 10 | 50 | 6 |
| LNB3012 | R1.5 | 2.90 | 4 | 12 | 50 | 6 |
| LNB3016 | R1.5 | 2.90 | 4 | 16 | 50 | 6 |
| LNB3020 | R1.5 | 2.90 | 4 | 20 | 60 | 6 |
| LNB3025 | R1.5 | 2.90 | 4 | 25 | 60 | 6 |
| LNB4012 | R2.0 | 3.88 | 5 | 12 | 60 | 6 |
| LNB4016 | R2.0 | 3.88 | 5 | 16 | 60 | 6 |
| LNB4020 | R2.0 | 3.88 | 5 | 20 | 60 | 6 |
| LNB4025 | R2.0 | 3.88 | 5 | 25 | 75 | 6 |
| LNB4030 | R2.0 | 3.88 | 5 | 30 | 75 | 6 |
