UER-tyypin kovametalliterä 4-leikkuinen
4-leikkuinen TialNpinnoitettu terä
45° kulmalla ja nurkkapyöristyksellä.
Raekoko 0,4 µm.
Soveltuu teräksille kovuuteen 65 HRC asti.
Ole hyvä ja kirjaudu sisään ostaaksesi. Kirjaudu sisään
Kuvaus
| Features: |
|
1. The special design is suitable for surface, slot, side and 3D milling of steel material up to HRc52.
|
| Working Materials Hardness Level: Good at steels with hardness up to HRc32~52. E.g. P20, NAK80, SKD61(HRc52), S136(HRc52) etc. |
Applicable Milling Methods:  Finishing  Semi-finishing  Roughing |
| Applicable Coolant Ways: MQL (Mist) Machining Dry Machining ,Emulsion Machining ,Oil Machining |
| Type No. | Diameter | Corner R | Flute Length | OAL | Shank Dia. |
|---|---|---|---|---|---|
| D1 | R | L1 | L3 | D2 | |
| UER0202 | 2.0 | 0.2 | 6 | 50 | 4 |
| UER0205 | 2.0 | 0.5 | 6 | 50 | 4 |
| UER0302S | 3.0 | 0.2 | 8 | 50 | 3 |
| UER0305S | 3.0 | 0.5 | 8 | 50 | 3 |
| UER0402 | 4.0 | 0.2 | 10 | 50 | 4 |
| UER0405 | 4.0 | 0.5 | 10 | 50 | 4 |
| UER0505 | 5.0 | 0.5 | 13 | 50 | 6 |
| UER0510 | 5.0 | 1.0 | 13 | 50 | 6 |
| UER0605 | 6.0 | 0.5 | 16 | 50 | 6 |
| UER0610 | 6.0 | 1.0 | 16 | 50 | 6 |
| UER0805 | 8.0 | 0.5 | 20 | 60 | 8 |
| UER0810 | 8.0 | 1.0 | 20 | 60 | 8 |
| UER1005 | 10.0 | 0.5 | 30 | 75 | 10 |
| UER1010 | 10.0 | 1.0 | 30 | 75 | 10 |
| UER1020 | 10.0 | 2.0 | 30 | 75 | 10 |
| UER1030 | 10.0 | 3.0 | 30 | 75 | 10 |
| UER1210 | 12.0 | 1.0 | 30 | 75 | 12 |
| UER1220 | 12.0 | 2.0 | 30 | 75 | 12 |
| UER1230 | 12.0 | 3.0 | 30 | 75 | 12 |
| UER1610 | 16.0 | 1.0 | 45 | 100 | 16 |
| UER1620 | 16.0 | 2.0 | 45 | 100 | 16 |
| UER1630 | 16.0 | 3.0 | 45 | 100 | 16 |
