Kovametalliterä UXR
4-leikkuinen TialN pinnoitettu terä 35° kulmalla.
Raekoko 0,4µm.
Soveltuu teräksille kovuuteen 65 HRC asti.
Ole hyvä ja kirjaudu sisään ostaaksesi. Kirjaudu sisään
Kuvaus
| Features: |
|
1. The special design is suitable for surface, slot, side and 3D milling of steel material up to HRc52.
|
| Working Materials Hardness Level: Good at steels with hardness up to HRc32~52. E.g. P20, NAK80, SKD61(HRc52), S136(HRc52) etc. |
Applicable Milling Methods:  Finishing, Semi-finishing, Roughing. |
| Applicable Coolant Ways: MQL (Mist) Machining,Dry Machining, Emulsion Machining, Oil Machining. |
| Type No. | Diameter | Nick Dia. | Corner R | Flute Length | Effective Length | OAL | Shank Dia. |
|---|---|---|---|---|---|---|---|
| D1 | D3 | R | L1 | L2 | L3 | D2 | |
| UXR0403 | 4.0 | 3.90 | 0.3 | 6 | 12 | 50 | 6 |
| UXR0405 | 4.0 | 3.90 | 0.5 | 6 | 12 | 50 | 6 |
| UXR0603 | 6.0 | 5.80 | 0.3 | 8 | 18 | 50 | 6 |
| UXR0605 | 6.0 | 5.80 | 0.5 | 8 | 18 | 50 | 6 |
| UXR0610 | 6.0 | 5.80 | 1.0 | 8 | 18 | 50 | 6 |
| UXR0803 | 8.0 | 7.70 | 0.3 | 10 | 24 | 60 | 8 |
| UXR0805 | 8.0 | 7.70 | 0.5 | 10 | 24 | 60 | 8 |
| UXR0810 | 8.0 | 7.70 | 1.0 | 10 | 24 | 60 | 8 |
| UXR1005 | 10.0 | 9.60 | 0.5 | 12 | 30 | 75 | 10 |
| UXR1010 | 10.0 | 9.60 | 1.0 | 12 | 30 | 75 | 10 |
| UXR1020 | 10.0 | 9.60 | 2.0 | 12 | 30 | 75 | 10 |
| UXR1030 | 10.0 | 9.60 | 3.0 | 12 | 30 | 75 | 10 |
| UXR1205 | 12.0 | 11.5 | 0.5 | 15 | 36 | 75 | 12 |
| UXR1210 | 12.0 | 11.5 | 1.0 | 15 | 36 | 75 | 12 |
| UXR1605 | 16.0 | 15.5 | 0.5 | 24 | 40 | 100 | 16 |
| UXR1610 | 16.0 | 15.5 | 1.0 | 24 | 40 | 100 | 16 |
