MET-tyypin kovametalliterä 2-leikkuinen
2-leikkuinen terä 35° leikkuukulmalla.
TiSiN-pinnoite.
Raekoko 0,4 µm.
Sopii teräksille HRC 60 asti.
Ole hyvä ja kirjaudu sisään ostaaksesi. Kirjaudu sisään
Kuvaus
| Features: |
|
1. The micro diameter of ball nose endmill design, which is suitable for 3D cutting of steel materials hardness HRc48~65.
|
|
2. The minimum diameter is 0.2mm.
|
| Working Materials Hardness Level: Good at steel material (HRc 22~52). E.g. SUS304, P20, NAK80, SKD61(HRc52) etc. |
Applicable Milling Methods:  Finishing  Semi-finishing |
Applicable Coolant Ways: Emulsion Machining , Oil Machining MQL (Mist) Machining  Dry Machining |
| Type No. | Diameter | Flute Length | OAL | Shank Dia. |
|---|---|---|---|---|
| D1 | L1 | L3 | D2 | |
| MET0022 | 0.2 | 0.4 | 50 | 3 |
| MET0032 | 0.3 | 0.6 | 50 | 3 |
| MET0042 | 0.4 | 0.8 | 50 | 3 |
| MET0052 | 0.5 | 1.0 | 50 | 3 |
| MET0062 | 0.6 | 1.2 | 50 | 3 |
| MET0082 | 0.8 | 1.6 | 50 | 3 |
| MET0102 | 1.0 | 2.5 | 50 | 3 |
| MET0122 | 1.2 | 3.0 | 50 | 3 |
| MET0142 | 1.4 | 3.0 | 50 | 3 |
| MET0152 | 1.5 | 4.0 | 50 | 3 |
| MET0162 | 1.6 | 4.0 | 50 | 3 |
| MET0182 | 1.8 | 5.0 | 50 | 3 |
| MET0202 | 2.0 | 6.0 | 50 | 3 |
| MET0252 | 2.5 | 8.0 | 50 | 3 |
| MET0302 | 3.0 | 8.0 | 50 | 3 |
