MSB-tyypin kovametalliterä 2-leikkuinen
2-leikkuinen terä 30° leikkuukulmalla.
TiSiN-pinnoite
Raekoko 0,4 µm.
Teräksille HRC 60 asti.
Ole hyvä ja kirjaudu sisään ostaaksesi. Kirjaudu sisään
Kuvaus
| Features: |
|
1. The micro diameter of ball nose endmill design, which is suitable for 3D cutting of steel materials hardness up to HRc52.
|
|
2. The minimum diameter is 0.3mm.
|
| Working Materials Hardness Level: Good at steel material (HRc 22~52). E.g. SUS304, P20, NAK80, SKD61(HRc52) etc. |
Applicable Milling Methods:  Finishing  Semi-finishing |
Applicable Coolant Ways: Emulsion Machining , Oil Machining MQL (Mist) Machining  Dry Machining |
| Type No. | Diameter | Flute Length | OAL | Shank Dia. |
|---|---|---|---|---|
| D1 | L1 | L3 | D2 | |
| MSB0032 | R0.15 | 0.6 | 50 | 3 |
| MSB0042 | R0.2 | 0.8 | 50 | 3 |
| MSB0052 | R0.25 | 1.0 | 50 | 3 |
| MSB0062 | R0.3 | 1.2 | 50 | 3 |
| MSB0072 | R0.35 | 1.4 | 50 | 3 |
| MSB0082 | R0.4 | 1.6 | 50 | 3 |
| MSB0102 | R0.5 | 2.0 | 50 | 3 |
| MSB0122 | R0.6 | 2.4 | 50 | 3 |
| MSB0142 | R0.7 | 2.8 | 50 | 3 |
| MSB0152 | R0.75 | 3.0 | 50 | 3 |
| MSB0162 | R0.8 | 3.2 | 50 | 3 |
| MSB0182 | R0.9 | 3.6 | 50 | 3 |
| MSB0202 | R1.0 | 4.0 | 50 | 3 |
| MSB0302 | R1.5 | 6.0 | 50 | 3 |
