UBT-tyypin kovametalliterä 2-leikkuinen
2-leikkuinen XCEED-pinnoitettu terä 30° kulmalla.
Raekoko 0,2 ym.
Soveltuu teräksille kovuuteen 65 HRC asti.
Ole hyvä ja kirjaudu sisään ostaaksesi. Kirjaudu sisään
Kuvaus
|
1. Special geometry with ”Long shank” design , is suitable for semi-finishing, finishing of 3D milling of high-hardness material.
|
| Working Materials Hardness Level: Good at steels with hardness up to HRc48~65. E.g. SKD61(HRc52), STAVAX(HRC52), SKD11(HRC62) etc. |
Applicable Milling Methods:  Finishing  Semi-finishing  Roughing |
| Applicable Coolant Ways: MQL (Mist) Machining Dry Machining , Emulsion Machining ,Oil Machining |
| Type No. | Diameter | Flute Length | OAL | Shank Dia. |
|---|---|---|---|---|
| D1 | L1 | L3 | D2 | |
| UBT0102 | R0.5 | 2 | 50 | 4 |
| UBT0102B | R0.5 | 2 | 50 | 6 |
| UBT0152 | R0.75 | 3 | 50 | 4 |
| UBT0152B | R0.75 | 3 | 50 | 6 |
| UBT0202 | R1 | 4 | 50 | 6 |
| UBT0302 | R1.5 | 6 | 50 | 6 |
| UBT0402 | R2 | 8 | 50 | 6 |
| UBT0502 | R2.5 | 10 | 50 | 6 |
| UBT0602 | R3 | 12 | 50 | 6 |
| UBT0802 | R4 | 16 | 60 | 8 |
| UBT1002 | R5 | 20 | 75 | 10 |
| UBT1202 | R6 | 24 | 75 | 12 |
| UBT1602 | R8 | 32 | 100 | 16 |
