DE-tyypin kovametalliterä 2-leikkuinen
Edullinen vaihtoehto
2-leikkuinen TiaLN pinnoitettu terä 35 asteen kulmalla.
Raekoko 0,6 µm.
Soveltuu teräksille kovuuteen 50 HRC asti
Ole hyvä ja kirjaudu sisään ostaaksesi. Kirjaudu sisään
Kuvaus
|
1. Economical 2 flutes flate endmill design. Good at general steels with hardness up to HRc45.
|
|
2. Economical choice.
|
| Working Materials Hardness Level: Good at steels with hardness up to HRc18~45. E.g. S45C,P20,NAK80,SUS304 etc. |
Applicable Milling Methods:  Finishing,Semi-finishing and Roughing |
Applicable Coolant Ways: MQL (Mist) and Dry Machining  Emulsion Machining and Oil Machining |
| Type No. | Diameter | Flute Length | OAL | Shank Dia. |
|---|---|---|---|---|
| D1 | L1 | L3 | D2 | |
| DE0102 | 1.0 | 3 | 50 | 4 |
| DE0152 | 1.5 | 4 | 50 | 4 |
| DE0202 | 2.0 | 6 | 50 | 4 |
| DE0252 | 2.5 | 8 | 50 | 4 |
| DE0302 | 3.0 | 8 | 50 | 4 |
| DE0402 | 4.0 | 11 | 50 | 4 |
| DE0502 | 5.0 | 13 | 50 | 6 |
| DE0602 | 6.0 | 16 | 50 | 6 |
| DE0802 | 8.0 | 20 | 60 | 8 |
| DE1002 | 10.0 | 25 | 75 | 10 |
| DE1202 | 12.0 | 30 | 75 | 12 |
| DE1602 | 16.0 | 40 | 100 | 16 |
