WUA tyypin kovametallirouhintaterä 4-leikkuinen
4-leikkuinen TialN pinnoitettu rouhintaterä
30 °kulmalla.
Raekoko 0,6 µm.
Soveltuu teräksille kovuuteen 55 HRC asti
Ole hyvä ja kirjaudu sisään ostaaksesi. Kirjaudu sisään
Kuvaus
| Features: |
|
1.Coarse teeth and medium pitch 4 flutes end mill design. Good at roughing for general steels hardness up to HRc45.
|
|
2. Not good at Finishing milling.
|
| Working Materials Hardness Level: Good at steel material (HRc 18~45). E.g. S45C, P20, NAK80, SUS304 etc. |
Applicable Milling Methods:  Semi-finishing ,Roughing |
Applicable Coolant Ways: MQL (Mist) Machining, Dry Machining  Emulsion Machining, Oil Machining. |
| Type No. | Diameter | Flute Length | OAL | Shank Dia. |
|---|---|---|---|---|
| D1 | L1 | L3 | D2 | |
| WUA0604 | 6.0 | 16 | 50 | 6 |
| WUA0804 | 8.0 | 20 | 60 | 8 |
| WUA1004 | 10.0 | 25 | 75 | 10 |
| WUA1204 | 12.0 | 30 | 75 | 12 |
| WUA1404 | 14.0 | 35 | 100 | 16 |
| WUA1604 | 16.0 | 40 | 100 | 16 |
| WUA1804 | 18.0 | 40 | 100 | 20 |
| WUA2004 | 20.0 | 45 | 100 | 20 |
